Products

Sludge Belt Press

A Belt Filter Press is a biosolids/sludge dewatering device that applies mechanical pressure to a chemically conditioned slurry, which is sandwiched between two tensioned porous belts, by passing those belts through a serpentine of decreasing diameter rollers. Water is then removed from the slurry and a non-liquid material is produced called cake.

Products

Sludge Belt Press

A Belt Filter Press is a biosolids/sludge dewatering device that applies mechanical pressure to a chemically conditioned slurry, which is sandwiched between two tensioned porous belts, by passing those belts through a serpentine of decreasing diameter rollers. Water is then removed from the slurry and a non-liquid material is produced called cake.

A Belt Filter Press is a biosolids/sludge dewatering device that applies mechanical pressure to a chemically conditioned slurry, which is sandwiched between two tensioned porous belts, by passing those belts through a serpentine of decreasing diameter rollers. Water is then removed from the slurry and a non-liquid material is produced called cake.

Typically, a belt filter press receives a slurry ranging from 1-4% feed solids and produces a final product of 14-34% cake solids. Performance depends on the nature of the solids being processed.

  • Automatic Operation: Timer control to allow continuous operation for present period. No operator required during the operation except for preparation of a polymer solution.
  • Wide Application: Suitable for all types of sludge, irrespective of whether the sludge is organic or inorganic in nature.
  • Rotary Thickener: Patented thickener effectively concentrates the incoming conditioned slurry by removing excess water. Our thickener exhibits a dewatering capacity of more than 35-40% compared to conventional belt press.
  • Auto Tensioner and Alignment Setting: The belt press is equipped with a built-in automatic tension adjustment system and an alignment setting system.
  • Self-Cleaning Mechanism: The belt will be automatically sprayed with water so as to keep the belt clean at all times. Minimum water is required. When the spray nozzles are clogged, just turn the red button to clean out the obstruction.
  • Low Polymer Consumption: Minimum polymer is required to condition the sludge before dewatering.
  • Low Operation and Maintenance Cost: The belt press is constructed with a stainless steel structure and rollers. Low power is required to run the belt press.
  • Safety Shut-Off: The belt press is equipped with an emergency stop button and a safety alarm system.

INDUSTRIES THAT USE Sludge belt press

Sludge Belt Press

A Belt Filter Press is a biosolids/sludge dewatering device that applies mechanical pressure to a chemically conditioned slurry, which is sandwiched between two tensioned porous belts, by passing those belts through a serpentine of decreasing diameter rollers. Water is then removed from the slurry and a non-liquid material is produced called cake.

Typically, a belt filter press receives a slurry ranging from 1-4% feed solids and produces a final product of 14-34% cake solids. Performance depends on the nature of the solids being processed.

  • Automatic Operation: Timer control to allow continuous operation for present period. No operator required during the operation except for preparation of a polymer solution.
  • Wide Application: Suitable for all types of sludge, irrespective of whether the sludge is organic or inorganic in nature.
  • Rotary Thickener: Patented thickener effectively concentrates the incoming conditioned slurry by removing excess water. Our thickener exhibits a dewatering capacity of more than 35-40% compared to conventional belt press.
  • Auto Tensioner and Alignment Setting: The belt press is equipped with a built-in automatic tension adjustment system and an alignment setting system.
  • Self-Cleaning Mechanism: The belt will be automatically sprayed with water so as to keep the belt clean at all times. Minimum water is required. When the spray nozzles are clogged, just turn the red button to clean out the obstruction.
  • Low Polymer Consumption: Minimum polymer is required to condition the sludge before dewatering.
  • Low Operation and Maintenance Cost: The belt press is constructed with a stainless steel structure and rollers. Low power is required to run the belt press.
  • Safety Shut-Off: The belt press is equipped with an emergency stop button and a safety alarm system.

Enquire Now